How To Power Outdoor Security Cameras?

There are numerous varieties of security cameras on the market, each with its power supply method. Cameras require a consistent and secure power supply; This is also true for most wireless devices. If you’re puzzled about running security camera cables or how to power an outdoor security camera, we’ve got you covered. You’ll find step-by-step instructions here that will teach you how to wire outdoor security cameras.

Note:

If you buy battery-powered cameras, you don’t have to worry about your camera power supply.

Getting Ready to Set Up Security Cameras

Because we are associating ourselves with electricity, cutting off the main power supply is critical before installing wired cameras. Here are some pointers for installing your security camera.

• You’ll need to think about the coverage area as well as the optimal location for quick installation. Ascertain that you have adequate cords and wires to complete the task. Make careful to take measurements between each site. 
• Ensure each camera has a clear line of sight, and choose a site at least 10 feet high to protect it.
• Examine the walls on which you intend to install or drill. If the walls are drywall, wood, or aluminum, you’ll need to get your power drill and drill bits ready.
• Before installing the components, layout the layout and test all equipment and cameras, making sure the holes are slightly larger than the wire.
• You will need a DVR. A Digital Video Recorder(DVR) is required to save and watch your film (DVR). This gadget collects all video streams and displays them on a monitor. DVRs come with different memory capacities that enable them to save additional amounts of video, ranging from hundreds of hours to a day’s worth of film. The DVR is generally bundled with the camera when you purchase a complete surveillance system.

How To Power Outdoor Security Cameras?

Almost every camera comes with a power adapter that connects to a standard wall outlet. Here are some methods for how to power outdoor security cameras:

Using Power Cable

Using the power cord included in the box to set up the security camera,

1. Install a power outlet within cord reach of the camera with the help of an electrician.
2. Route the camera cord to the socket.
3. Connect the wire to the camera.
4. Connect the power block to the outlet.

Related: How to Tell If a Security Camera is Recording?

Using An Extension Power Cable

For how to power an outdoor security camera using an extension cord to extend the camera’s reach, follow the steps below

1. Obtain a 12VDC extension cable with the right ends.
2. Follow the requirements for Class II low voltage wiring when connecting the extension cord to the ethernet cable.
3. Plug the stock power block cable into the extension cord at the hub/switch end of the ethernet line.
4. Connect the power block to the wall.

PoE method (Power over Ethernet)

PoE works by combining power and network connections on a single ethernet cord (Cat-5, Cat-5e, or Cat-6). IP cameras wired for PoE have a specific power switch to utilize the power delivered via the Ethernet cable. In contrast, cameras without this switch will only get a data connection and no electricity.

1. Connect your router/hub using only an ethernet wire.
2. Install a PoE switch/hub as an extension to, or replacement for, your router.
3. Connect an Ethernet wire to the PoE hub.

Do Wireless Security Cameras Operate Without The Use Of Power Cords?

It is dependent on the sort of wireless security cameras in question. There are three distinct sorts of power sources for wireless security cameras.

• Wired cameras 
• Solar-powered cameras
• cameras with built-in batteries

Wired Wireless Security Cameras 

When we say wireless, it typically implies that no wires are needed to send or transfer power to the receiver, such as a DVR/NVR or monitor. However, if the gadget requires electricity, it must be connected to a power source to charge. When powering a wireless camera, you should consider the length between security camera and the power source.

Solar-Powered IP Cameras For Security Surveillance

The only source of electricity for these surveillance cameras is a solar panel that gathers solar energy. The security camera should also include solar energy storage batteries that can get recharged.

These devices are of the highest quality in rural areas as they get conveniently charged by the sun. Hence, they can be very efficient and effective outdoor security cameras. As a result, these security cameras are appropriate for use on farms, in houses, on building sites, and in other locations where there is no readily available power supply. 

Related: Is It Weird To Have Cameras In Your House?

Wireless, Battery-Operated Security Cameras

There are security cameras that can get powered without the use of wires. They rely on rechargeable or changeable batteries instead. Because there are no wires involved, changing the batteries is also straightforward.

Some battery-powered cameras will only turn on when motion is detected to save battery life. Also, there’s no need to be concerned about the security camera’s power outage because the software will inform you of how much power the security camera consumes. However, the security camera may miss particular crucial activity.

Final Thoughts

When setting up cameras for your home’s security, wiring security cameras is a crucial step. Ensure that you have a good power supply through the walls to protect the camera from reconnecting. Some individuals prefer battery-powered security cameras, while others prefer standard plugged-in security cameras or solar-powered security cameras. It makes no difference whatever one you pick; they all produce high-quality pictures.

Alternatively, contact home security experts to set up a customized system. Many property security firms will set up cameras, motion detectors, and automated emergency dialing for you. However, the cost will be significantly more than a typical DIY installation. Nevertheless, if you have a large property, are unfamiliar with wiring, or want additional features such as motion detectors or security systems, contact a local security company.